Product Safety Commission To Draft Table-Saw Regs NPR has learned that federal regulators are taking steps toward new safety requirements for table saws. These saws have open spinning blades and can cause severe injuries. But the industry is resisting additional requirements.
NPR logo

Product Safety Commission To Draft Table-Saw Regs

  • Download
  • <iframe src="" width="100%" height="290" frameborder="0" scrolling="no" title="NPR embedded audio player">
  • Transcript
Product Safety Commission To Draft Table-Saw Regs

Product Safety Commission To Draft Table-Saw Regs

  • Download
  • <iframe src="" width="100%" height="290" frameborder="0" scrolling="no" title="NPR embedded audio player">
  • Transcript


NPR's Chris Arnold reports the industry is resisting new mandates.

CHRIS ARNOLD: For years, federal regulators have been aware of this issue. But after a push last month by consumer advocates and injured wood-workers, those regulators are starting to take action.

INEZ TENENBAUM: It's clear that we need a standard that will truly address and help reduce the tragically high number of finger and hand injuries that are occurring on a daily basis around the country.

ARNOLD: That's Inez Tenenbaum - the Chairman of the federal Consumer Product Safety Commission. She was speaking, yesterday, at a public meeting on table saw safety. NPR has learned that the commission has just directed its staff to draft a new regulation package which is likely to be released for public comment by the end of September.

TENENBAUM: I met with some of the victims late last month. And I personally witnessed the impact of their injuries. And their livelihoods have been deeply affected by the injuries that they suffered, and these injuries are preventable and there are solutions.

ARNOLD: The commission is considering whether to require something similar to the so-called SawStop system, which was developed by an inventor named Steve Gass. Gass now runs a successful table-saw company - and he's sold thousands of these safer table saws. The saw can detect the moment the blade makes contact with flesh instead of wood, and it then slams the blade to a stop - preventing these severe injuries. CPSC Commissioner Bob Adler.

BOB ADLER: It's a really powerful technology he's come up with.

ARNOLD: Adler says he doesn't want to sound like he's a champion for SawStop and its founder Steve Gass. But he says the technology breakthrough really does reminds him of some of the most dramatic safety improvements that the government has ever mandated. For one, he says, the rules for refrigerator doors that keep kids from getting locked inside.

ADLER: Since that laws been on the books and it's been about 50 years, there's never been a death - no kid gets caught inside and suffocates. He is holding out the prospect of having a technology that's almost that good. That virtually eliminates all of the amputations and all of the severe lacerations - hand, finger, elbow, arm - inadvertently going into a saw blade.

ARNOLD: Another commissioner compared the SawStop type technology to seat-belts in cars. Still, yesterday the commissioners heard from executives of many of the major power tool companies. They say it's not necessary to mandate this kind of flesh-sensing safety brake.

TOM SIGHWICK: So we would start by elevating the blade, as most users typically will lower the blade during transport...

ARNOLD: Yesterday at the CPSC's hearing room, Tom Sighwick with Robert Bosch Tool Corporation, showed one of his company's saws to the commissioners. A problem in the past has been that the plastic blade guards that can be fitted over the saw blade to protect users were too awkward. And people just took them off. So Sighwick is explaining how the industry has totally redesigned these guards.

SIGHWICK: They're a dramatic improvement over previous generation guards, and we believe have very positive acceptance by end users today. And we think is a very significant step in making these guards more effective.

ARNOLD: Industry executives said these new blade guards are so much better that it's not necessary to require the more expensive and complicated SawStop style safety systems. SawStop says its technology adds around $100 in cost to a saw. The industry though says it would cost more like two or three times that, and for popular low-price table saws that sell for $100 or $200...

GOGOLL: It basically, almost takes a product like this out of the market.

ARNOLD: That's Ted Gogoll, the director of Engineering Standards for DeWalt tools.

GOGOLL: It's a user issue, really. The users' feedback is there's so much they can pay.

ARNOLD: You're listening to MORNING EDITION from NPR News.

Copyright © 2011 NPR. All rights reserved. Visit our website terms of use and permissions pages at for further information.

NPR transcripts are created on a rush deadline by Verb8tm, Inc., an NPR contractor, and produced using a proprietary transcription process developed with NPR. This text may not be in its final form and may be updated or revised in the future. Accuracy and availability may vary. The authoritative record of NPR’s programming is the audio record.